Nikon L810 vs Panasonic SZ1

The following is a complete analysis of the Nikon L810 vs Panasonic SZ1, one is a Small Sensor Superzoom and the other is a Small Sensor Compact by companies Nikon and Panasonic. The sensor resolution of the L810 (16MP) and the SZ1 (16MP) is very well matched and both cameras posses the same sensor size (1/2.3").

Apple Innovates by Creating Next-Level Optical Stabilization for iPhone

The L810 was released within a month of the SZ1 and they are of a similar generation. The two cameras have the same body design (Compact).

Before getting right into a step-by-step comparison, here is a short introduction of how the L810 matches up versus the SZ1 with respect to portability, imaging, features and an overall mark.

Following is a sample of the gallery pics for Nikon Coolpix L810 and Panasonic Lumix DMC-SZ1. The complete galleries are viewable at Nikon L810 Gallery and Panasonic SZ1 Gallery.

If you're going to travel with your camera frequently, you will have to factor its weight and measurements. The Nikon L810 provides physical dimensions of 111mm x 76mm x 83mm (4.4" x 3.0" x 3.3") with a weight of 430 grams (0.95 lbs) while the Panasonic SZ1 has proportions of 99mm x 59mm x 21mm (3.9" x 2.3" x 0.8") and a weight of 131 grams (0.29 lbs).

Take a look at the Nikon L810 vs Panasonic SZ1 in the new Camera and Lens Size Comparison Tool.

Remember that, the weight of an Interchangeable Lens Camera will vary based on the lens you are working with at that time. Below is a front view scale comparison of the L810 vs the SZ1.

Looking at dimensions and weight, the portability grade of the L810 and SZ1 is 74 and 95 respectively.

Typically, it's hard to picture the contrast between sensor dimensions merely by checking a spec sheet. The image underneath might offer you a greater sense of the sensor dimensions in the L810 and SZ1.

Clearly, both of these cameras provide the same sensor dimensions and the identical megapixels and you should expect similar quality of photos though you have to factor the production date of the products into consideration.